INTERNATIONAL CYBERNETICS CORPORATION
SurPRO 2000 DATA REPORT
International Roughness Index & Ride Number Results
---------------------------------------------------
Report Date: 21:05:17 2007/01/07
File Name: 08NO0023.PFL (File Loaded from Disk)
Profiler Configuration
----------------------------------------------------------------
Model/Serial #: 2000 33
Software Revision: V4.0.4.00 2007/01/04
Wheel/Step Dist (m): 0.2500 0.0200
Dist Cal (counts/m): 27105.96
Incl Bias Drg (mrad): 3.05012
Incl Bias Aft (mrad): 3.05012
Incline Bias How: Two Way Cal
Incline Bias Date: 12:47:50 2005/10/19
Incline Bias Temp (øC): 33.6
Incline Gain Value: 1.000000
Test Description
----------------------------------------------------------------
Route: I35
County: STORY
Operator: REOSR
Project Number: 1
Contractor: ICC
Other1: L G
Other2: 39IN TO EDGE
Dirn Data Collected: Forward
Direction (Compass): N
Lane: 1
Wheelpath: R
Test Data
----------------------------------------------------------------
Test Date:
Start Time:
End Time:
Velocity Avg (km/h): 2.419
Velocity Max (km/h): 2.793
Steps: 10050
Distance (m): 201.00
Start Elevation (m): 0.000
End Elevation (m): 0.000
Temperature (øC): 31.2
Total Events: 3
Operating Mode: Rolling
IRI_RN by Fixed Section Length: 50 m
----------------------------------------------------------------
IRI Sctn Start End Start End IRI RN
steps steps m m m/km
----------------------------------------------------------------
IRI F0 0 10050 0.00 201.00 1.92 3.61
IRI F1 0 2500 0.00 50.00 1.36 3.84
IRI F2 2500 5000 50.00 100.00 1.72 3.76
IRI F3 5000 7500 100.00 150.00 2.31 3.38
IRI F4 7500 10000 150.00 200.00 2.30 3.55
IRI F5 10000 10050 200.00 201.00 0.79 3.36
IRI_RN by Section Control
----------------------------------------------------------------
IRI Sctn Start End Start End IRI RN
steps steps m m m/km
----------------------------------------------------------------
IRI S0 0 10050 0.00 201.00 1.92 3.61
IRI S1 0 10050 0.00 201.00 1.92 3.61
Note: No New Section events were found
IRI_RN by Roughness On/Off (Ron/Roff) Control
----------------------------------------------------------------
IRI Sctn Start End Start End IRI RN
steps steps m m m/km
----------------------------------------------------------------
IRI R0 0 10050 0.00 201.00 1.92 3.61
Note: R0 is Calculation of IRI_RN only over Roughness Distance
Note: RDST 200.78 m, 10039 steps: is Rough Dist (where Ron/Roff is ON)
IRI R1 0 10050 0.00 201.00 1.92 3.61
*** End of Report ***
---------------------
|